| Scientific and R&D Projects:
-
L. Arsov, M. Cundeva-Blajer et. al. -"Creation of the Third Cycle Studies-Doctoral Studies in Metrology", EU TEMPUS IV Jount Multicountry Project with participation of Ss. Cyril&Methodius University (MK), SEE University (MK), University of zagreb (HR), University of Split (HR), University of Prishtina (KS), University of Pavia (IT), University of Zaragoza (ES), Czech Tachnical University (CZ), University of Gävle (SE), Technical University of Braunschweig (DE), Graz University of Technology (AT), Higher School of Metrology Douai (France), Bureau of metrology (MK), 2010-2012
|
| M. Cundeva-Blajer, R. Malaric, L. Arsov, S. Cundeva et.al.
-
“Metrological Research and Development of Methods and Procedures for Measurement of Electromagnetic Quantities”, two-year international scientific project (bilateral with R. Croatia, FEIT-Skopje in co-operation with FER-Zagreb) financed by the Ministry of Education and Science of R. Macedonia and the Ministry of Science, Education and Sports of R. Croatia, 2007-2009
|
| L. Arsov, B. Handziski, M. Cundeva-Blajer, M. Jurukovska, R. Bojkovska
-
"Development of methods procedures for measurement, calibration and uncertainty estimation of electromagnetic quantities", three-year scientific project financed by the Ministry of education and science of R. Macedonia, 2006-2009
|
L. Arsov, M. Cundeva-Blajer, K. Todorovski
-
“Improvement of the Technology and the Technological Process and Introduction in the Production New Types of Electrical Cables”, one-year research and development project financed by the Ministry of education and science of R. Macedonia (FEIT Skopje in co-operation with FK Zdenka-Negotino), Skopje, 2009-2010
M. Cundeva-Blajer, L. Arsov, Slavco Delovski - “Development of new product: Software for laboratory management and quality assurance”, еone-year research and development project financed by the Ministry of education and science of R. Macedonia (FEIT Skopje in co-operation with SIMT-Skopje), Skopje, 2009-2010 |
| M. Cundeva-Blajer, V. Ciconkov
-
- „Introduction of process of cleaner production in PHI St. Naum Ohridski", Report on the Project for Cleaner Production (Macedonian National Centre for Cleaner Production in co-operation with UNIDO ), Skopje 2009
|
| M. Cundeva-Blajer, L. Arsov, C. Stojanov
-
"Improvement of the technology and the production process of power cables", one-year research and development project financed by the Ministry od Education and Science of R. Macedonia (FEIT-Skopje in co-operation with ALEVADO DOO-Veles), 2007-2008
|
| L. Arsov, M. Cundeva-Blajer, V. Stamboliev, G. Stamboliev
-
"Development of a new product-Electronic Electricity Meter with LCD and embedded clock with four tariffs, modem 220 V and optical link", one-year research and development project financed by the Ministry of Education and Science of R. Macedonia (FEIT-Skopje in co-operation with DOOEL ENERGETIKA-VDS-Strumica) 2007-2008
|
| S. Cundeva, M. Cundeva-Blajer, V. Arnautovski-Toseva
-
"Application of modern software tools for modeling and simulation in the secondary electrotechnical vocational schools", accredited training of the teachers financed by the Project for Modernization of the Education (FEIT-Skopje, Ministry of Education and Science of R. Macedonia, Bureau for Development of the Education in co-operation with the World Bank) 2007-2008
|
| V. Dimcev, C. Gavrovski, L. Arsov, M. Cundeva-Blajer, C. Mitrovski, et. al.
-
“Introduction of Two-tier Studies of Metrology”, two-year European project financed by the European Training Foundation TEMPUS JEP CD 19010_2004 with partners from Holland (TU Delft), Poland (AGH University-Krakow) and Italy (Politechnico di Milano), 2005-2007
|
| L. Arsov, M. Cundeva-Blajer, J. Dimitriev, S. Angelevska-Kolevska, M. Saleva, M. Teohareva
-
"Development of new product-cable resistive to atmosphere chargings type XHEh-91(XHEh 91-A) for 12/20 kV voltage level", one-year research and development project financed by the Ministry of Education and Science of R. Macedonia (in co-operation with Cable Factory-Negotino) 2004-2005
|
| M. Cundeva-Blajer
-
"A Contribution to the Development and Analysis of Combined Current-Voltage Instrument Transformer by Using Modern CAD Methods", Ph.D. Thesis, Ss. Cyril & Methodius University, Faculty of Electrical Engineering, Skopje, 2004, 209 pages
|
| L. Arsov, M. Cundeva, Jordan Sikoski, Zafir Jovanoski, Miroslav Ginoski
-
"Development of new product- Combined current-voltage instrument transformer for 20 kV voltage level", one-year research and development project financed by the Ministry of Education and Science of R. Macedonia, (Faculty od Electrical Engineering-Skopje in co-operation with EMO AD-Ohrid), 2003-2004
|
| G. Krismanic, E. Kitz, E. Leiss, M. Cundeva, H. Pfuetzner
-
"Magnetic Losses Measurements by Means of Poynting Vector", one-yearscientific project financed by Hochschuljubilaeumsstiftung der Stadt Wien, Austria, (in co-operation with TU Wien-Austria), 2003-2004
|
| L. Arsov, B. Handziski, P. Vrangalov, M. Cundeva, R. Sekerinska, Z. Srbinovski, R. Bojkovska
-
"Development of methods, procedures and equipment for measurement and calibration of electromagnetic quantities", three-year international scientific project financed by the Ministry of Science of R. Macedonia , Skopje, 2000-2003
|
| M. Cundeva
-
"A Novel Approach to the Analysis and Design of an Apparatus for Testing the Characteristcis of Electrical Steel Sheet", M. Sc. Thesis, 187 pages, FEIT, Skopje, 2000
|
| L. Arsov, B. Handziski, P. Vrangalov, M. Cundeva, R. Sekerinska, Z. Srbinovski, R. Bojkovska
-
"Development of methods and instrumentation for electrical measurements and calibrations", three-year international scientific project financed by the Ministry of Science of R. Macedonia, Skopje, 1997-2000
|
| J. Sievert, M. Cundeva, et. al.
-
"Justification of the NWIP; An Informative Annex to the IEC Publication 60404-3 (1992): Methods for Measurement of Magnetic Properties of Magnetic Sheet and Strip By Means of Single Sheet Tester – Relationship Between The Epstein Frame and SST Results", two-year international scientific project financed by the International Electrotachnical Commission IEC (in co-operation with the Laboratory of Magnetic Measurements at the PTB, Braunschweig, Germany) 1997-1999
|
| Papers published in international scientific journals:
-
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“Transient Analysis of Special Transformers Coupled with FEM”, Journal of Optoelectronics and Advanced Materials , Vol. 10 No. 5, 2008, pp. 1132-1136
|
| M. Cundeva-Blajer, S. Cundeva, L. Arsov
-
"Nonlinear Electromagnetic Transient Analysis of Special Transformers", Studies in Applied Electromagnetics and Mechanics, Vol. 30: Advanced Computer Techniques in Applied Electromagnetics, IOS Press, Amsterdam, 2008, pp. 167-174
|
| M. Cundeva-Blajer, L. Arsov
-
"FEM-3D Electromagnetic Field Analysis Coupled with Genetic Algorithm for Measurement Uncertainties Estimation and Optimal Design of an Instrument Transformer", International Journal of Applied Electromagnetics and Mechanics, Vol. 28, IOS Press, Amsterdam, 2008, pp. 25-31
|
| M. Cundeva-Blajer, L. Arsov
-
“FEM-3D for Metrological Optimal Design and Transient Analysis of Combined Instrument Transformer”, Prezeglad Elektrotechniczny, ISSN 0033-2097, R. 83 NR 7-8/2007, Warszawa, Poland, 2007 pp. 96-99
|
| M. Cundeva, L. Arsov, G. Cvetkovski
-
"Genetic Algorithm Coupled with FEM-3D for Metrological Optimal Design of Combined Current-Voltage Instrument Transformer", COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 23 No. 3, 2004, Emerald Group Publishing Lmtd., 0332-1649, pp. 670-676
|
| M. Cundeva, L. Arsov
-
"Experimental Verification of the Results from the FEM-3D Magnetic Field Analysis of Epstein Frame", Studies in Applied Electromagnetics and Mechanics, Electromagnetic Fields in Electrical Engineering, Vol. 22, 2002, IOS Press Ohmsha, 1383-7281, pp. 379-384
|
| M. Cundeva, L. Arsov
-
"FEM-3D Application for Modeling and Design of Epstein Frame", COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 19 No. 2, 2000, MCB University Press, 0332-1649, pp. 396-402
|
| M. Cundeva, L. Arsov
-
"Modeling and Design of Epstein Frame Using FEM-3D", Studies in Applied Electromagnetics and Mechanics, Non-Linear Electromagnetic Systems, Vol. 18, 2000, IOS Press Ohmsha, 1383-7281, pp. 105-108
|
| J. Sievert, H. Ahlers, P. Brosien, M. Cundeva, J. Luedke
-
"The Measurement of Magnetic Properties of Grain-Oriented Steel – Relationship of Epstein Frame to Single Sheet Tester Results", Studies in Applied Electromagnetics and Mechanics, Non-Linear Electromagnetic Systems, Vol. 18, 2000, IOS Press Ohmsha, 1383-7281, pp. 3-6
|
| Scientifc contributions presented at conferences and published in books of proceedings:
-
|
-
M. Cundeva-Blajer, L. Arsov, L. Ferkovic, R. Malaric, D. Ilic - “Special Instrument Transformers for Precise Measurements of High Volatges and Currents”, Зборник на трудови на 6-тото Советување за големи електрични системи MAKOCIGRE 2009, Охрид, Р. Македонија, 4-6 Октомври 2009 (CD ROM A2-11R)
L. Arsov, A. Sala, M. Cundeva-Blajer, H. Hegedus – “Inter-Laboratory Comparison of DC Volatge Reference Standards”, Зборник на трудови на 9-тата Национална конференција со меѓународно учество ETAI 2009, Охрид, Р. Македонија, 26-29 Септември 2009(CD ROM E2-5)
L. Arsov, R. Malaric, Z. Grkov, M. Cundeva-Blajer – “Calibration of the FEIT Resistance Standards”, Зборник на трудови на 9-тата Национална конференција со меѓународно учество ETAI 2009, Охрид, Р. Македонија, 26-29 Септември 2009 (CD ROM E2-6)
M. Cundeva-Blajer, L. Arsov – “Finite Element Method for Metrological Analysis of Measurement Devices”, Зборник на трудови на 9-тата Национална конференција со меѓународно учество ETAI 2009, Охрид, Р. Македонија, 26-29 Септември 2009(CD ROM E1-4)
M. Cundeva- Blajer, L. Arsov – “Electromagnetic Transient Analysis of Combined Instrument Transformer with Embedded 3D-Finite Element” The 14th Int. Symp. on Applied Electromagnetics and Mechanics, ISEM’09 Conference Proceedings, Xi’an, PR China, 20-24 September 2009, pp. 81-82
M. Cundeva-Blajer, S. Cundeva, L. Arsov – “Optimisation and Computer Aided Design of Special Transformers”, The 14th Int. Symp. on Electromagnetic FIelds in Electrical Engineering, ISEF’09 Conference Proceedings, Arras, , 9-13 September 2009 (CD ROM Paper ID 215)
S. Cundeva, M. Cundeva-Blajer, L. Arsov - “Design Optimization of Special Transformers-CAD, FEM and GA Coupled Approach”, Proceedings of the 9th International Conference on Applied Electromagnetics ПЕС 2009 Niš, 31 August to 02 September, 2009(CD ROM O1_5)
R. Malaric, M. Cundeva-Blajer, L. Arsov, H. Hegeduš, P. Mostarac – “Development of Precise Measurement Methods of Electrical Quantities in Macedonia and Croatia”, Proceedings of the 7th International Conference on Measurement MEASUREMENT 2009, Smolenice Castle, Slovakia 20 - 23 May, 2009, pp. 385-388 |
| L. Arsov, M. Cundeva-Blajer, R. Bojkovska
-
“Uncertainty in the Accreditation of Chemical Laboratories”, Proceedings of the 1st Regional Metrology Organisations Symposium RMO & 20th International Metrology Symposium, Cavtat-Dubrovnik, Croatia, 12-15 November, 2008
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“Electromagnetic Transients of Special Transformers - Coupled FEM and GA Approach”, Conference records on CD from 6th Mediterranean Conference on Power Generation, Transmission and Distribution - MedPower 08, paper No. 66, pp. 1-6, Thessaloniki, Greece, 2-5 November, 2008
|
| M. Cundeva-Blajer, L. Arsov, L. Ferkovic, R. Malaric, D. Ilic
-
“Metrological Infrastructure for Measurement of High Voltages and Currents in Macedonia and Croatia”, Proceedings of the 16th International Measurement Confederation IMEKO TC4 International Symposium, Florence, Italy, 22-24 September 2008, pp. 548-551
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“FEM Coupled with GA for special transformers optimal design in transient regimes”, Book of digests of 2nd Symposium on Applied Electromagnetics SAEM’08, Zamosz, , 1-4 June 2008 (CD ROM)
|
| M. Cundeva-Blajer, S. Cundeva, L. Arsov
-
“Special Transformers Transient Analysis”, Conference Proceedings of the 5th Conference for Large Power Systems MAKOCIGRE 2007, Ohrid, R. Macedonia, 7-9 Octomber 2007, pp. A2-10R
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“Modeling and Simulation of Special Transformers-Part 2: Dynamic Analysis”, Conference Proceedings of the 8th National Conference with International Participation ETAI 2007, Ohrid, R. Macedonia, 19-21 September 2007, pp. A3-2 (CD ROM)
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“Modeling and Simulation of Special Transformers-Part 1: Electromagnetic Analysis”, Conference Proceedings of the 8th National Conference with International Participation ETAI 2007, Ohrid, R. Macedonia, 19-21 September 2007, pp. A3-1 (CD ROM)
|
| S. Cundeva, M. Cundeva-Blajer, L. Arsov
-
“Transient Analysis of Special Transformars Coupled with FEM”, The 5th Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic and Superconducting and Nano Materials, JAPMED’07 Conference Proceedings Larnaca, Cyprus, 16-19 September 2007, pp. 123-124
|
| M. Cundeva-Blajer, S. Cundeva, L. Arsov
-
“Nonlinear Electromagnetic Transient Analysis of Special Transformers”, The 13th Int. Symp. on Electromagnetic FIelds in Electrical Engineering, ISEF’07 Conference Proceedings, Prague, Czech Republic, 13-15 September 2007, pp. 2.EE-1/034 (CD ROM)
|
| M. Cundeva-Blajer, L. Arsov
-
“FEM-3D Electromagnetic Field Analysis for Measurement Uncertainties Estimation of an Instrument Transformer”, The 13th Int. Symp. on Applied Electromagnetics and Mechanics, ISEM’07 Conference Proceedings, East Lansing, MI, USA, 9-12 September 2007, pp. 49-50
|
| M. Cundeva-Blajer, L. Arsov
-
“Metrological Improvement of Electromagnetic Measurement Devices by Using FEM-3D”, The 10th Portuguese-Spanish Congress in Electrical Engineering, XCLEEE’07 Conference Proceedings, Funchal-Madeira Islands, Portugal, 5-7 July 2007, pp. 4. 17-4. 20 (CD ROM)
|
| M. Cundeva-Blajer, L. Arsov
-
“Uncertainties Estimation of Measurement Devices by Using Finite Element Method”, The 42nd International Scientific Conference on Information, Communication and Energy Systems and Technologies,ICEST’07 Conference Proceedings, Ohrid, R. Macedonia, 24-27 June 2007, pp.121-124
|
| M. Cundeva-Blajer, L. Arsov
-
“Metrological FEM-3D Analysis of Combined Instrument Transformer Transient Regimes”, The 5th Mediterranean Conf. on Power Generation, Transmission, Distribution and Energy Conversion, ELECTRICITY-MEDPOWER 2006 Conference Proceedings, Eilat, Israel, 15-17 November, 2006 (CD ROM)
|
| M. Cundeva-Blajer, L. Arsov
-
"Magnetic Measurements Coupled with Electromagnetic Field Analysis", The 1st SAEM Macedonian-Polish Symposium on Applied Electromagnetics, SEAM 2006 Conference Proceedings, Ohrid, Macedonia, 8-10 June 2006, (CD ROM)
|
| M. Cundeva-Blajer, L. Arsov
-
"FEM-3D for Metrological Optimal Design and Transient Analysis of Combined Instrument Transformer", The 1st SAEM Macedonian-Polish Symposium on Applied Electromagnetics, SEAM 2006 Conference Proceedings, Ohrid, Macedonia, 8-10 June 2006,(CD ROM)
|
| M. Cundeva, L. Arsov
-
"Experimental Verification of the CAD Analysis and Design Results of Combined Current-Voltage Instrument Transformer", The 13th IMEKO TC4 International Symposium on Electrical Measurements and Instrumentation, IMEKO TC4 2004 Conference Proceedings, Athens, Greece, 29 September-1 October 2004, pp.485-492
|
| M. Cundeva, L. Arsov, G. Cvetkovski
-
"Optimal Design of Combined Current-Voltage Instrument Transformer by Application of FEM-3D and Genetic Algorithm", Conference Proceedings of the 4th Conference for Large Power Systems MAKOCIGRE 2004, Ohrid, R. Macedonia, 26-29 September 2004, pp.1/8-8/8
|
| M. Cundeva, L. Arsov
-
"Metrological and Transient Analysis of Combined Instrument Transformer Coupled with FEM-3d Magnetic Field Study", The Progress in Electromagnetic Research Symposium Conference Proceedings, PIERS 2004, Pisa, Italy, 28-31 March 2004, pp.433-436
|
| G. Krismanic, E. Kitz, E. Leiss, M. Cundeva, H. Pfuetzner
-
"Measuring System Considering Flux Inhomogenity and Eddy Currents in SST Samples", The 16th Soft Magnetic Materials Conference SMM 2003 Conference Proceedings, Duesseldorf, Germany, 9-12 September 2003 pp. 299-304
|
| M. Cundeva, L. Arsov, G. Cvetkovski
-
"Genetic Algorithm Coupled with FEM-3D for Metrological Optimal Design of Combined Current-Voltage Instrument Transformer", The 11th International Symposium on Electromagnetic FIelds in Electrical Engineering ISEF 2003 Conference Proceedings, Maribor, Slovenia, 18-20 September 2003 pp. 449-454
|
| M. Cundeva, L. Arsov, G. Cvetkovski
-
"Metrological Optimal Design of Combined Current-Voltage Instrument Transformer by Using Genetic Algorithm Coupled with FEM-3D", The 8th Portuguese-Spanish Congress in Electrical Engineering 8CLEEE 2003 Conference Proceedings, Vilamoura-Algarve, Portugal, 3-5 July 2003 pp. 1. 113-1. 118
|
| M. Cundeva, L. Arsov
-
"Advanced FEM-3D Metrological Approach to the Analisys of Combined Instrument Transformer", The 17th International Measurement Confederation World Congress IMEKO WC 2003 Conference Proceedings, Cavtat-Dubrovnik, Croatia, 22-27 June 2003 pp. 481-484
|
| M. Cundeva, L. Arsov
-
"FEM-3D Approach to the Magnetic Field Analisys of Combined Current-Voltage Instrument Transformer", The 11th International Symposium on Applied Electromagnetics and Mechanics ISEM 2003 Conference Proceedings, Versailles, France, 12-14 May 2003 pp. 188-189
|
| M. Cundeva, L. Arsov
-
"FEM-3D Magnetic Field Analysis for Metrologically Improved Design of Combined Current-Voltage Instrument Transformer", The 3rd Mediterranean Conference and Exhibition on Power Generation, Transmission, Distribution and Energy Conversion MEDPOWER 2002 Conference Proceedings, Athens, Greece, 4-6 November 2002 pp. 59-60 (Conference Proceedings CD ROM MED02/050 , the paper is proclaimed to be the best paper of the scienitific session T3 Analysis of transformers ant rotational machines)
|
| M. Cundeva, L. Arsov
-
"Metrologically Improved Design of Combined Current-Voltage Instrument Transformer by Using FEM-3D", The 12th IMEKO TC4 International Symposium on Electrical Measurements and Instrumentation, IMEKO TC4 2002 Conference Proceedings, Zagreb, Croatia, 25-27 September 2002, pp. 282-285
|
| M. Cundeva, L. Arsov
-
"Design And Development of Testing Equipment for Electrical Steel Sheet by Using FEM-3D", The 4th Power Systems Conference, PSC 2001 Conference Proceedings, Timisoara, Romania, 8-9 November 2001, pp. 113-116
|
| M. Cundeva, L. Arsov, R. Salkovski
-
"Development of Prototype of Electrical Steel Sheet Testing Apparatus EPSMAK by Using FEM-3D", The 3rd Symposium on Large Power Systems, MAKO-CIGRE 2001 Conference Proceedings, Ohrid, Macedonia, 3-6 October 2001, STK 12-06
|
| M. Cundeva, L. Arsov
-
"Experimental Verification of the Results from the FEM-3D Magnetic Field Analysis of Epstein Frame", The 10th International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF 2001 Conference Proceedings, Krakow, Poland, 20-22 September 2001, pp. 251-256
|
| M. Cundeva, L. Arsov
-
"FEM-3D Magnetic Field Analysis for Novel Design of Epstein Frame", JSAEM Studies in Applied Electromagnetics and Mechanics, Vol. 9, The 10th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2001 Conference Proceedings, Tokyo, Japan, 13-16 May 2001, pp. 229-230 (ISEM Award for Outstanding Presentation Paper)
|
| M. Cundeva, L. Arsov
-
"FEM-3D Approach to the Analysis of Epstein Frame: Testing Evaluation of Numerical Results", 6th International Workshop on 1&2-Dimensional Magnetic Measurement and Testing, 2-DM 2000 Conference Proceedings, Bad Gastein, Austria, 20-21 September 2000, Vienna Magnetics Group Reports 3-902105-00-3, pp. 207-214
|
| M. Cundeva, L. Arsov
-
"FEM-3D Application for Modeling and Design of Epstein Frame", Conference Proceedings of the International Symposium on Electromagnetic Fields in Electrical Engineering ISEF’99, Pavia, Italy, 23-25 September 1999, pp. 441-444
|
| M. Cundeva, L. Arsov
-
"Modeling and Design of Epstein Frame Using FEM-3D", Conference Proceedings of the 9th International Symposium on Non-Linear Electromagnetic Systems ISEM’99, Pavia, Italy, 10-12 May 1999 pp. 29-30
|
| J. Sievert, H. Ahlers, P. Brosien, M. Cundeva, J. Luedke
-
"The Measurement of Magnetic Properties of Grain-Oriented Steel – Relationship of Epstein Frame to Single Sheet Tester Results", (invited paper) Conference Proceeding of the 9th International Symposium on Non-Linear Electromagnetic Systems ISEM’99, Pavia, Italy, 10-12 May 1999, pp.1-2
|
| V. Arnautovski, M. Cundeva, L. Grcev
-
"Computation and Measurement of Low Frequency Magnetic Field Near Arbitrary Thin-Wire Structures", 1st Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics JBMSAEM’98 Conference Proceedings, Sofia, Bulgaria, 14-15 September 1998, pp.49-50
|
| M. Cundev, L. Petkovska, M. Cundeva
-
"Electromagnetic Field Computation in Electrical Machines", 8th International Symposium on Non-Linear Electromagnetic Systems ISEM’97 Conference Digest, Braunschweig, Germany, 12-14 May 1997, WPA2-7
|
| Tutorials and education manuals:
-
|
| M. Cundeva-Blajer
-
„Application of modern software tools for modeling and simulation, Part 3: Systems Analysis by using the Finite Element Method“, Manual for accredited training of teachers in the secondary vocational schools, FEIT, Skopje, 2008
|
| C. Gavrovski, V. Dimcev, M. Cundeva-Blajer, M. Srbinovska
-
“Basics of Measurement Technique”, Tutorial Excersizes, CD_JEP-19010-2004, FEIT, Skopje, 2006
|
| C. Gavrovski, V. Dimcev, M. Cundeva-Blajer, M. Srbinovska
-
"Basics of Measurement Technique", Laboratory Excersizes Manual, CD_JEP-19010-2004, FEIT, Skopje 2006
|
| L. Arsov, R. Sekerinska, M. Cundeva
-
"Electronic Materials", Laboratory Excersizes Manual, 32 pages, ETF, Skopje, April 1997
|
| L. Arsov, M. Cundeva
-
"Electrical Measurements of Non-Electrical Quantities", Laboratory Excersizes Manual, 15 pages, ETF, Skopje, December 1997
|